Fully Racked up with Bruce Gordon Low-Rider

Part two of how I have been racking up the front end of Rambler No.1.  Yesterday you saw the Mark’s rack from Nitto.  That rack is a great handlebar bag support and for occasional small loads.  When I know I will be hauling more volume, and need the panniers, I go with the Bruce Gordon Low-rider rack.  Hand welded with aircraft grade 4130 steel in Petaluma, Ca, these racks are IMO the best bang for your buck in front pannier racks.  The design is rock solid, the price fair at around $180, and it will likely be the last front low-rider rack you will ever need to buy.  If you do need to get rid of it, the used market has been around $120 for as long as I can remember.  Here is Rambler No. 1 all racked up:

The way I have it set up you can quickly take it off and on without having to alter the position of the upper rack at all.  The upper rack mounts to the inside of the fork, the low-rider to the outside.  Two nuts at the top and two bolts at the dropout and you are ready to go.  Production Ramblers will have the hourglass mount located higher than my sample so that this rack will bolt up right out of the box.

The space between mounting points provides plenty of clearance between the top cross bar of the low-rider and the support struts for the Mark’s Rack.  Easy on and easy off for the panniers.

Mark’s Rack Fit on the Rambler

The Rambler while a well handling bike with no load aside from the rider, is designed to ride well with a modest front load.  As part of the design there are integral rack mounting points: two eyelets at each dropout, two mid fork hourglass mounts, a hole drilled through the crown at the traditional brake mounting point and two M5  bosses set into the shoulders of the fork crown.  One of the questions that keeps comment up with the Rambler is what front rack do I recommend.  In particular a rack that will work well with the rack mounting bosses located in the shoulders of the fork crown.  While popular among custom bikes of this genre, this mount is less common on production bikes.  By providing for two upper mounting points, the rack can be more stable and have redundancy.  In the case that one upper mount should fail, loose a bolt etc., you have a second mount in place helping to prevent the load from crashing into the front tire.  Trust me, loads into the tire are not a good thing.  Solid rack mounting helps to keep things where they belong and you rolling safely.

The most versatile and well made small front rack on the market at the moment is the ‘Mark’s” rack produced by Nitto of Japan, and designed by Rivendell employee Mark Abel.  This rack is made of brazed CrMo steel with a nickel plate finish for long corrosion free service.  The mounting has provisions for four struts and a center bracket to the crown.  These options allow it to easily mount to just about any bike as a strong and attractive solution.  I have been using it on the Rambler with the central mount to the crown and the two front struts connected to the mid-fork.  I recently replaces the central mount to the crown with two aluminum struts between the rack and the upper crown mounting points.

Rambler with Marks rack

Rambler with Marks rack

Rambler with Marks rack

With the mount to the center of the crown the rack was stable, now it is rock solid.  I had to reshape the supplied mounting struts a bit, hammer and bench vise.  After trimming things to length it all bolted right up.  While I knew it would fit fine, it is exciting when a plan comes together.  Next, since I have a habit of fiddling with things, I will work out a way to attach the fender r added support and fine tune the fit.

The way I have it set up I can quickly install/remove the Bruce Gordon low-rider pannier rack.  I will have a pictorial of this process in the next week.  The keen of eye will notice that I have all of this mounted to a band clamp on the mid fork.  Production Ramblers will have the hourglass mounted such that the racks will bolt right up.  So far little details like this are all that needs to be adjusted between the samples and production.  Testing continues, but I am ecstatic with how these are turning out.

Resist Nomad Early Review

I have been riding the Resist Nomad 700×42 for almost 6 weeks and almost 1000 miles, and feel comfortable sharing my initial impressions of the tires.  Over the years I have come to appreciate the ride quality of fat light weight tires on the road.  Experience has proved for me at least that you can get the comfort and speed, rolling over all of the little stuff and most of the big stuff too without having to give up speed and acceleration.  The catch in the 700c size is a limited selection of true light weight performance tires wider than 32mm.

While the selection for tires like this is improving, most have a more pronounced knobby tread.  I was excited to see the Resist Nomad hit the market a little over a year ago.  These tires are primarily designed for the freestyle urban scene.  The fact that they meet the demands of the mixed terrain / fat tired road bike crowd was a bit of a surprise for Resist.  The catch for me at the time was not having a bike that would fit tires this wide.  Rambler No.1 then entered stage left.  My Rambler is purpose-built around tires this wide.  While my production samples were under way I was in contact with Resist to get some samples in my hands.   Currently these are the lightest 700x42mm tire on the market that I know of.

Out of  the box I was pretty impressed.  I have samples in both the skin wall and black wall.  The skin walled tires average 530g while the black walls average 560g.  Both currently are only available with a wire bead.  While not a svelte race tire, the weight is quite reasonable when you consider that the popular 650bx42mm Grand Bois Hetre’ is roughly 430g with a folding bead.  The width is a rue 42mm.  The tread is a semi slick with micro pyramids broken up with a larger square grid.  The street price on these tires is around $30.

Enough with the stats, the ride is what really matters, and it has been great.  Initially they were a little bit loud, a sort of hum from the tread against the road, but that quickly faded as the tire wore in a bit.  I have kept the pressure between 40-50 psi for my combined rider/load/bike weight in the 240lb ball park.  Handling has been superb.  They get a little bit of roll or dive at the rim if I let the pressures drop below 35psi.  The road buzz from our currently terrible roads is gone.  It really is like riding on pillows.  Average times and speeds, about 18mph cruising, are on par with my previous data I collected riding Jack Brown greens or a variety of 28mm tires on other bikes.  Cornering and grip in dry weather is fantastic.  I am able to carry more speed through turns, ride through rough patches and hold more consistent lines than previously possible on narrower tires.  Unfortunately (or Fortunately) we are a bit spoiled with a lack of rain in the SoCal basin and I have not had a chance to push these in the wet.   On fire roads and the trails they have held their own well.  While obviously not as grippy as a true MTB tire, the added volume and contact patch has been welcome in easing the attention I need to pay to my line with the “skinny” 35mm tires I have been on in the last couple of years.   The Nomads help to bridge the gap between true underbiking and a knobby tire.

The build quality is what you would likely expect for a tire at this price point.  For $30 retail you can not expect the level of detail and finish that has been coming out of the Panaracer Japan group for some of the other popular boutique tires.  As you can see in the picture the two sides of the mold were not well aligned.  The casing and rubber around the bead on the skin walls is a little thin.  One of my samples has a short tear from being a bit heavy-handed with a tire lever, and that tire is now out of service.  I have only had one flat to date.  It was in the rear and caused by a thin truck tire wire.  Considering the amount of glass and debris on out roads this is pretty good.  I tend to pick up flats or slow leaks like this every couple of months. Thus a single flat early on is just that, a flat, and marginally an indicator of long-term performance.

Bottom line, these look to be a great tire for the price.  I will likely run them for a long time, and look forward to a long-term follow-up review.  If your bike has the room to fit these tires I would not hesitate to pick up a pair.  I am happy enough with them that I may be adding them to the storefront in the next few weeks.  There are a bunch of variables in that equation, but I know I will stock them eventually.

650b Conversion Kits

I am putting together the bits and pieces needed for a customer who wants to dip their toe in the 650b waters before diving in with a propose built frame set.

As always these projects require a bit of measuring and test fitting to get things just right.  In this case we were able to meet so that I could pull the required measurements myself from the bike to be converted.

The biggest part of the investment, the wheel set, is directly transferable to a Rambler he finds the waters to his liking. The 32mm tires would work fine, but I am sure that he would want to go fatter as the Rambler would allow.  The only thing that would end up in the parts bin is the Tektro brakes.

The knowledge and components needed to pull off a successful 650b conversion are scattered throughout the web.  What would you think of having that information in one place, as well as the needed components to pull it all off?  Rivendell used to have something like this, but does not appear to be a focus of theirs as much any more.  How about a kit price on a package like the one above?

Tried and Liked Dia-Compe ENE Shifters

As I am getting things going there will be quite a few components passing through my hands and onto bikes.  Some of these will be things I have used for years, some new, and some in the gray area in between.  The ones that I find remarkable will get special mention here on the blog, and may even show up in the soon to emerge online shop.

The first up for review are the new Dia-Compe ENE shifters.  These are mechanically identical to the Silver friction shifters that Rivendell helped to bring back to market a few years back.  The difference is in the look and shape.

The Silver shifters have a more modern like the later Suntour down tube shifters.  The ENE shifters shown here are styled after more traditional or older Campy style.  They offer the same silky smooth ratchet mechanism that we have grown to love over the years.  For those not familiar with friction shifting.  Unlike indexed shifting that you “click” from gear to gear, friction allows you infinite freedom to shift across the range of gears.  For the initiate thee may be a short learning curve, but once you have the control back you will not likely want to give it up.  Friction shifting allows the rider to shift smoothly across a range of gears, mix and match drive train components to you heart’s delight and trim a shift as needed without touching a barrel adjuster.

I prefer this shape to the silver model.  The slightly wider and textured tail of the lever has a better feel.   I also like the look, while not a complete retro-grouch, sometimes the classic styling just works.

The ENE shifter are available as a pair in both a down tube model and bar end configuration.  Both will be offered here for sale in the coming week.  Down Tube shifters will be $44, and Bar End $79.

Thanks for taking a look.