Coaxial Lighting Wire

As part of the program here at Ocean Air Cycles I have been working on sourcing components and materials for complete builds.  Often times the materials or parts we are used to as cyclists end up being tied up by distributors who have exclusive import deals and will not work with us as a bicycle producer or based the fact that we do not have a physical retail presence.  As an aside we may never have a “retail” presence that certain suppliers define as a retail bike shop, and thus we have been developing alternate sources or products that may be familiar in the Rando or touring bike market, i.e. berthoud, Schmidt, and B&M are just a few.

The entire supply chain for high end dynamo powered lighting systems in the USA ends up being funneled through Peter White.  I am sure he is a great guy, I bought a fine set of wheels from him years ago, and those of you who have worked with him have your own opinions I am sure.  Aside from all of the great information on lighting and wheel building, he is also the importer and distributor.  Without the ability to get things wholesale, I started the search for alternates to many of the products offered.  Some are much harder to get than others.  We are still looking for a reliable source on the metric electrical connectors out favorite lights and hubs use.  I was able to source lights from Europe earlier in the year but that is getting harder.

When setting up the Lighting systems on the bikes, there is quite often a need for longer or better wire to make the long run to the tail light.  After a long search and testing a few different options out we have been having good luck with a coaxial microphone cable.

10.4 wire -1140641Setting up the ends is a bit more work with careful trimming, stripping and shrink wrapping.  In my opinion the results are worth it.  The cable itself is easier to run, the flexibility helps in fishing it through the frame.  The outer diameter is 3mm and fits perfectly though the guide eyelets on out Rambler forks.  The resilient outer casing will help reduce the chance of nick or breaks and possible short circuits.

The best part of the source?  Pricing is well under Schmidt branded wire coming from Europe.  In the next couple of weeks we will add shrink wrap kits to our offerings.

Special Offer:  For the first 25 customers we are selling the wire in a 9 foot length (enough to do most bikes front and rear) for $0.25 plus shipping.  I am limiting this to one per customer, and once all 25 are gone pricing will go to $0.32 a foot

2 thoughts on “Coaxial Lighting Wire”

  1. Excellent! You’ve picked up on an inside secret of electrical and electronics engineers… that you can’t believe the hype of some marketers when it comes to wiring. Back when I was in the home theater installation biz, brands like Monster Cable sold wiring for 10 times the unit price of generic wiring of the same gauge with false promises of extracting better sound. Hogwash!

    Good for you for showing that you don’t need the expensive Schmidt wire. It’s high quality but not worth even one quarter of the price.

    I used a similar co-axial signal wire (sourced from a local electronics supply house for $0.25/foot in bulk) when doing the custom wiring for two recent Weigle builds:

    http://www.flickr.com/photos/7516215@N03/8699466807/

    http://www.flickr.com/photos/7516215@N03/8482624873/

    The only thing I would warn about is that the coaxial wire (carrying taillight hot) should be no thinner than 24AWG, otherwise you will experience some voltage drop across the long distance between the dynamo output and the taillight. Maybe not much, but still not a good idea.

    The downside of coaxial wiring (or any two-conductor wiring) is that you can’t run it inside the rolled edge of a Honjo Fender. Only narrow single-conductor wire will fit there, using the fender and frame as common ground:

    http://www.flickr.com/photos/7516215@N03/8696651637/

    However, the 3mm coaxial cable can be routed along the underside of a fender through little aluminum guides glued in place:

    http://www.flickr.com/photos/7516215@N03/9491830768/

    And when you REALLY want to get fancy with slick 3mm round wiring, you can get a 3-conductor variant to incorporate both headlight and taillight wiring into one cable system. Here I’ve replaced the four thick wires (2 are shared ground) of an IQ Cyo with a single 3-conductor 3mm round cable:

    http://www.flickr.com/photos/7516215@N03/8733545658/

  2. Hi Sommerville. I am trying to do a similar lighting project. I have been at the hardware store a few times today trying to figure out what kind of cable I can use, but no luck. Can you give me specific information about the coaxial cable you are using? I am in Germany (although American) so shopping for these sorts of things is a little trickier. Thanks a lot!!

Leave a Reply

Your email address will not be published. Required fields are marked *